Oracle Reports
1. What is a Lexical Parameter?
Lexical parameters are used to
substitute multiple values at runtime and are identified by a preceding
‘&’. Lexicals can consist of as little a one line where clause to an entire
select statement
Lexical Parameters are used to execute query
dynamically.
Example: An example of a lexical
parameter usage in a select statement is as follows
Select * from emp, deptno
&where.
In
the properties of the 'where' user parameter, make sure that the data type of
the 'where' user parameter is set as character.
If you know the maximum length that your where clause is going be, you
can set the width of the where parameter to be slightly greater than that
number. Otherwise, set it to some number
like 100.
If
your lexical parameter ('where') width is not enough to hold the where
condition assigned to it, you will receive one of the following errors
depending on your Reports version.
REP-0450 - Unhandled exception,
and ORA-6502- PL/SQL numeric or value error.
or
REP-1401 - Fatal PL/SQL error in
afterptrigger
and ORA-6502-PL/SQL numeric or value error.
2. What is a Bind Variable?
Bind
parameters are used to substitute single value at runtime for evaluation and
are identified by a preceding ‘:’.
An example of a bind parameter in a select statement is provided below, where :P_EMP is the bind parameter reference.
Select
ename,empno
From emp
Where empno=
:P_EMP
These are used as tokens while
registering concurrent program.
3.
Difference
between lexical and bind variable?
Bind references are
used to replace a single value in SQL or PL/SQL. Specifically, bind references may be used to
replace expressions in SELECT, WHERE, GROUP BY, ORDER BY, HAVING,CONNECT BY,
and START WITH clauses of queries. Binds
may not be referenced in the FROM clause.
An example is:
SELECT ORDID,TOTAL
FROM ORD
WHERE CUSTID = :CUST
Lexical references
are placeholders for text that you embed in a SELECT statement. You can use lexical references to replace the
clauses appearing after SELECT, FROM, WHERE, GROUP BY , ORDER BY , HAVING,
CONNECT BY, and START WITH. You cannot
make lexical references in PL/SQL.
Before you reference a lexical parameter in a query you must have
predefined the parameter and given it an initial value. An example is:
SELECT ORDID, TOTAL
FROM &ATABLE
4. How many types of Triggers
are there and what are they? Tell their sequence of execution.
Report triggers
execute PL/SQL functions at specific times during the execution and formatting
of your report. Using the conditional
processing capabilities of PL/SQL for these triggers, you can do things such as
customize the formatting of your report, perform initialization tasks, and
access the database. To create or modify
a report trigger, use Report Triggers in the Object Navigator. Report triggers must explicitly return TRUE
or FALSE. Report Builder has five global
report triggers (you cannot create new global report triggers):
Before Parameter Form
trigger
After Parameter Form
trigger
Before Report trigger
Between Pages trigger
After Report trigger
Before Report trigger and After Report
trigger should be declared compulsory. In the Before Report trigger we declare
the srw.user_exit(‘ fnd srwinit’) user exist and in the
After Report trigger srw.user_exit (‘fnd
srwexit’)
The sequence/order of events when a
report is executed is as follows:
Before Parameter Form trigger is fired.
1 Runtime Parameter Form appears (if not suppressed).
2 After Parameter Form trigger is fired (unless the user cancels from the Runtime Parameter
Form).
3 Report is "compiled."
4 Queries are parsed.
5 Before Report trigger is fired.
6 SET TRANSACTION READONLY is executed (if specified via the READONLY argument
or setting).
7 The report is executed and the Between Pages trigger fires for each page except the last one.
(Note that data can be fetched at any time while the report is being formatted.) COMMITs
can occur during this time due to any of the following--user exit with DDL, SRW.DO_SQL
with DDL, or if ONFAILURE=COMMIT, and the report fails.
8 COMMIT is executed (if READONLY is specified) to end the transaction.
9 After Report trigger is fired.
10 COMMIT/ROLLBACK/NOACTION is executed based on what was specified via the
ONSUCCESS argument or setting.
Cautions
=========
1. In steps 4 through 9, avoid DDL statements that would modify the tables on which the
report is based. Step 3 takes a snapshot of the tables and the snapshot must remain valid
throughout the execution of the report. In steps 7 through 9, avoid DML statements that
would modify the contents of the tables on which the report is based. Queries may be
executed in any order, which makes DML statements unreliable (unless performed on tables
not used by the report).
2. If you specify READONLY, you should avoid DDL altogether. When you execute a DDL
statement (e.g., via SRW.DO_SQL or a user exit), a COMMIT is automatically issued. If you
are using READONLY, this will prematurely end the transaction begun by SET
TRANSACTION READONLY.
Report trigger restrictions
=============================
1. If you are sending your report output to the Runtime Previewer or Live Previewer, you
should note that some or all of the report triggers may be fired before you see the report
output. For example, suppose that you use SRW.MESSAGE to issue a message in the
Between Pages trigger when a condition is met. If there are forward references in the report
(e.g., a total number of pages displayed before the last page), Report Builder may have to
format ahead to compute the forward references. Hence, even though you have not yet seen
a page, it may already have been formatted and the trigger fired.
2. In report triggers, you can use the values of report-level columns and parameters. For
example, you might need to use the value of a parameter called COUNT1 in a condition
(e.g., IF :COUNT1 = 10). Note, though, that you cannot reference any page-dependent columns (i.e., a column with a Reset At of Page) or columns that rely on page-dependent columns.
3. In the Before and After Parameter Form, and Before and After Report triggers, you can set
the values of parameters (e.g., give them a value in an assignment statement, :COUNT1 =
15). In the Before and After Report triggers, you can also set the values of report-level,
placeholder columns.
4. In the Between Pages trigger, you cannot set the values of any data model objects. Note also
that the use of PL/SQL global variables to indirectly set the values of columns or parameters
is not recommended. If you do this, you may get unpredictable results.
5. If you run a report from Report Builder Runtime (i.e., not the command line or
SRW.RUN_REPORT), you should commit database changes you make in the Before
Parameter Form, After Parameter Form, and Validation triggers before the report runs.
When running in this way, these triggers will share the parent process’ database connection.
When the report is actually executed, however, it will establish its own database connection.
6. A lexical reference cannot be used to create additional bind variables after the After
Parameter Form trigger fires. For example, suppose you have a query like the following
(note that the WHERE clause is replaced by a lexical reference):
SELECT ENAME, SAL FROM EMP
&where_clause
If the value of the WHERE_CLAUSE parameter contains a reference to a bind variable, you
must specify the value in the After Parameter Form trigger or earlier. You would get an
error if you supplied the following value for the parameter in the Before Report trigger. If
you supplied this same value in the After Parameter Form trigger, the report would run.
WHERE SAL = :new_bind
Before Parameter Form trigger is fired.
1 Runtime Parameter Form appears (if not suppressed).
2 After Parameter Form trigger is fired (unless the user cancels from the Runtime Parameter
Form).
3 Report is "compiled."
4 Queries are parsed.
5 Before Report trigger is fired.
6 SET TRANSACTION READONLY is executed (if specified via the READONLY argument
or setting).
7 The report is executed and the Between Pages trigger fires for each page except the last one.
(Note that data can be fetched at any time while the report is being formatted.) COMMITs
can occur during this time due to any of the following--user exit with DDL, SRW.DO_SQL
with DDL, or if ONFAILURE=COMMIT, and the report fails.
8 COMMIT is executed (if READONLY is specified) to end the transaction.
9 After Report trigger is fired.
10 COMMIT/ROLLBACK/NOACTION is executed based on what was specified via the
ONSUCCESS argument or setting.
Cautions
=========
1. In steps 4 through 9, avoid DDL statements that would modify the tables on which the
report is based. Step 3 takes a snapshot of the tables and the snapshot must remain valid
throughout the execution of the report. In steps 7 through 9, avoid DML statements that
would modify the contents of the tables on which the report is based. Queries may be
executed in any order, which makes DML statements unreliable (unless performed on tables
not used by the report).
2. If you specify READONLY, you should avoid DDL altogether. When you execute a DDL
statement (e.g., via SRW.DO_SQL or a user exit), a COMMIT is automatically issued. If you
are using READONLY, this will prematurely end the transaction begun by SET
TRANSACTION READONLY.
Report trigger restrictions
=============================
1. If you are sending your report output to the Runtime Previewer or Live Previewer, you
should note that some or all of the report triggers may be fired before you see the report
output. For example, suppose that you use SRW.MESSAGE to issue a message in the
Between Pages trigger when a condition is met. If there are forward references in the report
(e.g., a total number of pages displayed before the last page), Report Builder may have to
format ahead to compute the forward references. Hence, even though you have not yet seen
a page, it may already have been formatted and the trigger fired.
2. In report triggers, you can use the values of report-level columns and parameters. For
example, you might need to use the value of a parameter called COUNT1 in a condition
(e.g., IF :COUNT1 = 10). Note, though, that you cannot reference any page-dependent columns (i.e., a column with a Reset At of Page) or columns that rely on page-dependent columns.
3. In the Before and After Parameter Form, and Before and After Report triggers, you can set
the values of parameters (e.g., give them a value in an assignment statement, :COUNT1 =
15). In the Before and After Report triggers, you can also set the values of report-level,
placeholder columns.
4. In the Between Pages trigger, you cannot set the values of any data model objects. Note also
that the use of PL/SQL global variables to indirectly set the values of columns or parameters
is not recommended. If you do this, you may get unpredictable results.
5. If you run a report from Report Builder Runtime (i.e., not the command line or
SRW.RUN_REPORT), you should commit database changes you make in the Before
Parameter Form, After Parameter Form, and Validation triggers before the report runs.
When running in this way, these triggers will share the parent process’ database connection.
When the report is actually executed, however, it will establish its own database connection.
6. A lexical reference cannot be used to create additional bind variables after the After
Parameter Form trigger fires. For example, suppose you have a query like the following
(note that the WHERE clause is replaced by a lexical reference):
SELECT ENAME, SAL FROM EMP
&where_clause
If the value of the WHERE_CLAUSE parameter contains a reference to a bind variable, you
must specify the value in the After Parameter Form trigger or earlier. You would get an
error if you supplied the following value for the parameter in the Before Report trigger. If
you supplied this same value in the After Parameter Form trigger, the report would run.
WHERE SAL = :new_bind
5. What is a Format Trigger?
Format triggers are PL/SQL
functions executed before the object is formatted. The trigger can be used to dynamically change
the formatting attributes of the object.
The function must return a Boolean value (TRUE or FALSE). Depending on whether the function returns
TRUE or FALSE, the current instance of the object is included or excluded from
the report output. You can access format
triggers from the Object Navigator, the Property Palette, or the PL/SQL Editor.
A format trigger is a PL/SQL
function executed before an object is formatted. A trigger can be used to dynamically change
the formatting attributes of the object.
6. What is Anchoring?
It is a feature thru
which we can control the position of the boiler plate or data fields in layout.
Anchors are used to
determine the vertical and horizontal positioning of a child object relative to
its parent. The end of the anchor with a
symbol is attached to the parent object.
When you create a
default layout, Reports will create some of its own implicit anchors. These are not visible. There may be occasions
when you want to create your own explicit anchors to force objects to be
positioned together or to conditionally specify when the object prints.
You create an explicit anchor as follows:
1.
Select the Anchor tool in the Layout Tool Palette.
2.
Click on an edge of the Child object.
3. Move
the cursor to the edge of the Parent object and double click to fix the anchor.
You can position the anchor at any distance
down the edge of the object. The
distance is a percentage of the total length of the edge. You can adjust this position in the anchor
property sheet.
Examples of using explicit anchors:
ANCHORING BOILERPLATE TO A FRAME
--------------------------------
You may want to display some boiler plate to
the right of, and half way down a vertical list of records.
In this case, you would create an anchor from
the child boilerplate to the parent, group or repeating frame. Ensure the parent end point is 50% down the
right edge of the frame.
ANCHORING CONDITIONAL OBJECTS
----------------------------
To adjust the position of a layout object if
the anchoring parent does not display, you can define your explicit anchor as
collapsible either horizontally or vertically.
The child layout object then collapses, to suppress additional spacing,
if the parent object does not print.
An example of where you might use this would
be on Mailing Labels.
Mailing Labels often
include optional fields to allow variable number of lines in an address. You may want to suppress the fields that are
null, so that the address in the labels does not have gaps between the lines.
For example:
f_name
f_address1
f_address2
f_address3
f_address4
where f_address2 is an optional field.
1.
Select f_address2 in the layout editor and go into the property sheet.
2. In Reports V2.5, under the general layout
tab, click on the Format Trigger
Edit button to create the following format
trigger.
In other versions of Reports, under
advanced layout, click on the Format
Trigger to create the following format
trigger.
FUNCTION f_address2 RETURN BOOLEAN IS
BEGIN
IF :address2 IS NULL THEN
RETURN (FALSE);
ELSE
RETURN (TRUE);
END IF;
END;
3. Then create an anchor from f_address3 (the
field below) upto to f_address2 (the optional field). In the anchor properties place a check in the
collapse vertically check box.
4. Create another anchor, this time from
f_address4 to f_address3, again setting it to collapse vertically. This process needs to be done for all the
fields below the optional field to avoid any unwanted spaces.
7. What is Frame and Repeating
Frame?
Frames are used to
surround other objects and protect them from being overwritten or pushed by
other objects. For example, a frame
might be used to surround all objects owned by a group, to surround column
headings, or to surround summaries.
Repeating frames are
place holders for records. Repeating
frames print once for each record of a group and control record-level
formatting. Reports will generate one
repeating frame for each group when you create a default layout.
Reports will place
containers of columns inside of the frames.
Each repeating frame retrieves only one row in its fetch cycle for any
one repetition. Until it is constrained
by another frame, it will repeat itself until the while loop condition can no
longer be satisfied.
We give group in data model as source to
repeating frame.
8. What are Confined Mode and
Flex Mode?
Confined mode allows
objects to be locked into the place in the layout. Objects are maintained
within their containers.
CONFINE
mode is not for a specific object, but applies to all objects on the layout
when it is enabled (locked).When it is turned off (unlocked), you are allowed
to move an object outside its surrounding frame. When it is turned on (locked),
you are unable to move an object outside its surrounding frame. This is to prevent unnecessary 'Frequency
Errors'.
Flex mode preserves the layout structure while
allowing expanding and shrinking of the layout.
FLEX
mode, when enabled, allows surrounding frames to grow as an object is resized
or moved. Only one object at a time can
be moved either vertically or horizontally, not diagonally.
9. What are User Exits?
You build user exits
when you want to pass control from Report Builder to a program you have
written, which performs some function, and then returns control to Report
Builder.
You can write the following types of user
exits:
* ORACLE
Precompiler user exits
* OCI
(ORACLE Call Interface) user exits
* Non-ORACLE
user exits.
User exits can
perform the following tasks:
* Perform
complex data manipulation
* Pass
data to Report Builder from operating system text files
* Manipulate
LONG RAW data
* Support
PL/SQL blocks
* Control
real time devices, such as a printer or a robot
You can use user exits for other tasks, such
as mathematical processing.
However, it is
recommended that you perform such tasks with PL/SQL within Report Builder
itself.
Ex: FNDSRWINIT,
FNDSRWEXIT.
10. How do I Register a Custom
Report?
Step 1: Register a concurrent program executable
Navigate to the Define Executable form
(AOL Reference manual pg 9-84)
This determines the type of program
being run,ie an Oracle Report. Fill in the executable name, application and
execution method. For the Execution File, fill in just the filename. The
concurrent manager will look in the appropriate directory under the
application's top directory.
For spawned programs, the file must be
in the bin directory, for Oracle Reports the rdf file must be in the srw
directory.
For PLSQL concurrent programs, put the
name of the stored procedure.
Step 2: Define the concurrent
program
Navigate to the Define Concurrent
Program form (AOL Reference manual pg 9-87)
This form links a concurrent program
to the executable you just defined, as well as defines the programs parameters,
incompatibilities, and other options.
Enter the concurrent
program name, application, short name and description. Check Standard
Submission if you want to be able to submit this program from the Standard
Report Submission form.
Enter the name of the
executable you defined and any report information if necessary. Also define any
parameters your program needs here and any incompatibilities.
Step 3: Add the concurrent program to
a Report Group
First you will need to find the name
of the Report Group to use.
Go to Security->Responsibility and
query the responsibility you want to run the program with.
It should show a Report Group name.
Query this name in Security->Responsibility->Report
Add your new program to the list of available programs. Now when you go
to submit a request with this responsibility, you will be able to submit your
custom program.
11. What is a Token?
Token is used to
attach a bindvariable to a report parameter while registering the report as
concurrent program.
12. What is the use of ‘Send to
Back’ and ‘Bring to Front’?
To change the order
in which objects are layered on top of each other.
Send to Back to move
the object behind all other objects.
Bring to Front to
move the object in front of all other objects.
13. If 2nd parameter
value is based on 1st parameter then how do u declare it?
Let v2 be the value
set definition of 2nd parameter and v1 be the value set definition
for the first parameter then
In the value set
definition of v2 = value $FLEX$.v1
14. What are Summary Column,
Place holder Column, and Formula Column?
A summary column
performs a computation on another column's data. Using the Report Wizard or Data Wizard, you
can create the following summaries: sum,
average, count, minimum, maximum, % total.
You can also create a summary column manually in the Data Model view,
and use the Property Palette to create the following additional summaries: first, last, standard deviation, variance.
A placeholder is a
column for which you set the data type and value in PL/SQL that you
define. You can set the value of a
placeholder column in the following places. A place holder column stores a
value which we can refer in the layout.
A formula column
performs a user-defined computation on another column(s) data, including
placeholder columns. Formula columns should not be used to set values for
parameters.
15. How do u hide fields in a
Report?
Ans: Using the Format Trigger we can hide
the fields.
/* Suppose that you
are building a master/detail report
** and, if no detail
records are retrieved for a master
** record, you do not
want the boilerplate labels to
** appear. To do this, you first create a summary
** column called
MYCOUNT with a Function of Count in
** the source group
of the master repeating frame.
** In the format
trigger for the group frame that
** surrounds the
detail repeating frame and its labels,
** you enter the
following:
*/
function my_formtrig
return BOOLEAN is
begin
if :mycount = 0 then
return (false);
else
return (true);
end if;
end;
16. What kinds of reports u have
worked on?
17. Name Custom Reports
and…--------------------------------------
18. How many types of Report
formats we have?
Custom Reports and
Standard reports
19. What is the minimum number
of groups required for a Matrix type report?
To create a matrix
report, you need at least four groups: one group must be a cross-product group,
two of the groups must be within the cross-product group to furnish the
"labels," and at least one group must provide the information to fill
the cells. The groups can belong to a
single query or to multiple queries.
A matrix (cross tab) report contains one row
of labels, one column of labels, and information in a grid format that is
related to the row and column labels. A
distinguishing feature of matrix reports is that the number of columns is not
known until the data is fetched from the database.
View the video report
builder help
20. What is the difference
between Bitmap and Character based reports? Explain in detail.
Bitmap vs.
Character-Mode Report Design
Here is an example to help explain how
Oracle Reports are designed and
printed in both the bitmap and character-mode environments.
Assume you wish to print "Cc"
where "C" is a different font and a larger point size than
"c" and is in boldface type (where "c" is not).
In Oracle Reports Designer, bitmap mode, you
can make "C" bold and in a
different font and point size than "c". This is because you are generating postscript
output. Postscript is a universal
printer language and any postscript printer is able to interpret your different
design instructions.
In Oracle Reports Designer, character mode,
the APPLICATIONS STANDARDS EQUIRE the report to be designed in ONE FONT/ ONE
CHARACTER SIZE. Character mode reports
generate ASCII output. In ASCII you
cannot dynamically change the font and character size. The standard is in
effect so a report prints as identically as possible from both conventional and
postscript printers.
Bitmap vs. Character-Mode Report Printing
These sequences contrast the two printing
environments. In postscript, "C" can be in a different font and point
size than "c". Both or either
could also be bold, for example.
In ASCII, "C" must be in the same
font and character size as "c".
Both or either could also be bold, for example.
Oracle Reports
Designer
|
| |----- ar20runb ------ Postscript ---- Postscript
--- "Cc"
| | executable language printer output
| |
"Cc"---
|
|
|----- ar20run ----*-- ASCII
--------- Printer ------ "cc"
executable | characters output
|
|
SRW
driver
(for
bold, underline,
page
break escape sequences)
21. What Printer Styles are used
for? Did you develop any printer styles?
Srw.driver
22. How do you fix a performance
problem in a Report?
Check Report main
query and fine tune it.
Create indexes on
columns used in where condition (eliminate full table scan)
Enable Trace(set
trace on in before report and set trace off in after report)
Before Report:
srw.do_sql('alter session set sql_trace=true');
After Report:
srw.do_sql('alter session set
sql_trace=false');
Trace file will be generated at
location:
select value from v$parameter
where name = 'user_dump_dest';
To better see
execution plans in a trace file, you need to format the
generated trace file
with tkprof statement.
23. What is the significance
of p_conc_request_id?
P_conc_request_id is
declared as the user parameter for reports which will get org specific data.
P_conc_request_id datatype is character and length is 15.
24. How
to call a stored procedure in the report? What is the use of that?
Package.prcedure
25. The
differences between forms 4.5 and forms 6i?
26. How
do you set ORG_ID in a SQL*Plus session?
Call the Below Anonymous pl/sql block.
BEGIN
fnd_client_info.set_org_context(‘204');
END;
Or
exec
dbms_application_info.set_client_info(‘org_id’);
27. The
differences between reports 2.5 and 6i?
28. While
registering a report and a pl/sql block we pass some parameters, for any pl/sql
block we pass two additional parameters. Can u list them?
p_errorcode and p_errorbuffer as out
parameters in main procedure.
It
requires 2 IN parameters for a PL/SQL procedure that's registered as a
concurrent program in Apps. They are
1.
errcode IN VARCHAR2
2.
errbuff IN VARCHAR2
29. How
we can call from form to form, form to report?
Calling a Form from another Form: FND_EXECUTE(…);
NOTE: The calling and called Forms must
be registered with Applications.
Calling a Report from a Form:
FND_REQUEST.SUBMIT_REQUEST(…);
NOTE: This method can be used to call
any concurrent program.
30. What
are logical page and physical page?
In the Runtime Previewer, you can scroll
though a single page of report output, page through the entire report, and
split the screen to view different sections of the same report concurrently.
A physical page (or panel) is the size
of a page that will be output by your printer.
A logical page is the size of one page of your actual report (it can be
any number of physical pages wide or long).
The Runtime Previewer displays the logical pages of your report output,
one at a time.
31. Why
is ref cursor is used in the reports?
Dynamic cursor
32. When
we create a report we use the tables, there is some difference when we use the
multi-org tables and ordinary tables, can u tell the difference?
Set p_conc_request_id for org specific
tables.
33. What
is a template and what is its use. We have predefined template and we can
define user-defined template. Can u tell why we use the user-defined template?
34. I
moved this field into that repeating frame, but I’m still getting a” frequency below its group” error?
35. I
must put a repeating frame around these fields. How do I do this easily?
36. I
switched the page size to 11 x 8.5, but the printer still prints in Portrait?
37. We
have 2 different databases, and each system has 2 tables. Know there is
a link provided between them. The client want a report to be developed based on
the 4 tables that r there in the 2 different databases. The solution must be
efficient?
Use database
links
0 comments:
Post a Comment